How to Make a Gnome Porch Decoration
Supplies Needed
Plastic pots (various sizes) Hot glue/glue gunSheet mossScissorsAssorted faux greens Wool dryer ballFaux berries3 22-inch dowelsZip tieFluffy white fleece 1-yard fluffy fleece fabric
Step-by-Step Directions
Follow these easy instructions for how to make a Christmas gnome for your front porch or another welcoming spot. You should be able to complete the Christmas craft project in under an hour.
Step 1: Stack Pots
Each gnome starts with a plastic gardening pot, so the first step is to decide how many gnomes you want to make and how large you want them to be. We used an 8-inch pot stacked on top of a 12-inch pot for a tall gnome and just one 12-inch pot for the shorter gnome. If you’re stacking pots, place them open side down and use hot glue to glue the small pot to the larger one. Let the glue dry completely.
Step 2: Attach Moss
Once you’ve prepped the pots, glue rolled sheet moss onto them. Start with a 14 x 48-inch sheet of moss and cut into three long strips. Then, cut each strip into 14-inch-long sections. Starting at the base of the bottom pot, use hot glue and a glue gun ($13, Target) to glue the strips vertically to the pots. There will be approximately 5 inches not covered at the top. Glue the strips so they slightly overlap on the sides until the entire body of the pot is covered.
Step 3: Add a Greenery Beard
Next, trim several stems of faux greenery (we used flocked greenery to make the beard appear white) and hot glue them to the front of the pot to make a beard shape. Once you’ve glued the greenery down, trim around the edges as necessary. When the beard is complete, hot glue a wool dryer ball directly above the beard (this creates the gnome’s nose) and use faux berries to accessorize the beard for a more festive look.
Step 4: Form the Hat Structure
To form a structure for the gnome’s hat, use a zip tie to attach three 22-inch dowel rods together at one end, creating a tripod shape. Place the end of the dowels into the pot’s drainage holes so that the wide part of the tripod is at the bottom and the zip-tied ends are at the top. If your pot doesn’t have drainage holes, you can simply secure the ends of the dowels to the top of the pot with hot glue.
Step 5: Add the Hat
To make the signature tall, pointy hat for your gnome, start with a 27x27-inch square of fleece fabric. First, fold the square in half and make a diagonal cut from the inner folded edge to the outer open edge. Next, hot glue the right sides of the fabric together at the cut seam and let the glue dry. Then, turn the fabric right-side out and place it over the dowels to create a hat.
Step 6: Add Arms
To give your little gnome arms:
Wrap two 10-inch sections of dowel rods in fleece and secure the fabric with hot glue.Cut a small piece of fluffy white fleece to form the cuff of each sleeve and glue these to each dowel.Attach the fleece-covered arms to the gnome’s body using hot glue.Add any other embellishments you like, then place the friendly decoration on your front porch.
We recommend displaying the gnome in a dry, covered area to protect it from extreme winter weather.
